User Manual_Shanghai Jiaoxi Laser Equipment Co.,Ltd

Jiaoxi Laser > User Manual >

How to Buy a Fiber Laser Marking Machine?

1. Consulting

We will recommend the most suitable fiber laser engraver machine to you after being informed by your requirements.

2. Quotation:

We will offer you with our detail quotation according to the consulted fiber laser engraver machine. You will get the most suitable specifications, the best accessories and the affordable price.

3. Process Evaluation:

Both sides carefully evaluate and discuss all the details (technical parameters, specifications and business terms) of the order to exclude any misunderstanding.

4. Place an Order:

If you have no doubt, we will send you the PI (Proforma Invoice), and then we will sign a contract with you.

5. Production:

We will arrange the fiber laser engraving machine production as soon as receiving your signed sales contract and deposit. The latest news about production will be updated and informed to the fiber laser engraver buyer during the production.

6. Quality Control:

The whole production procedure will be under regular inspection and strict quality control. The complete fiber laser engraver will be tested to make sure they can work very well before out of factory.

7. Delivery:

We will arrange the delivery as the terms in the contract after the confirmation by the fiber laser marker buyer.

8. Custom Clearance:

We will supply and deliver all the necessary shipping documents to the fiber laser marker buyer and ensure a smooth customs clearance.

9. Support and Service:

We will offer professional technical support and free service by Phone, Email, Skype, WhatsApp, Online Live Chat, Remote Service. We also have door-to-door service in some areas.
How to Maintain a Fiber Laser Engraver?

1. When the fiber laser engraver is not working, cut off the power of the machine and the computer, and cover the field lens cap to prevent dust from contaminating the optical lens.

2. If there is any malfunction of the fiber laser engraving machine, cut off the power immediately.

3. The circuit is in a high voltage state when the machine is working. Non-professionals should not perform maintenance during startup to avoid electric shock.

4. The lens absorbs heat and causes it to burst. When the marking effect is not good, carefully check the surface of the focusing lens for contamination.

5. If the fiber laser engraver is used for a long time, the dust in the air will be adsorbed on the lower surface of the focusing lens. The lighter will reduce the power of the laser and affect the marking effect; the heavy one will cause optics.

6. If the surface of the focusing lens is contaminated, remove the focusing lens and clean its lower surface.

7. The cleaning method is to inject absolute ethanol into the mixed solution with a long-fiber cotton swab or lens paper, and gently scrub it.

8. Take special care when removing the focusing lens, take care not to damage or drop it; also, do not touch the focusing lens surface with your hand or other objects.

9. The lower surface of the focusing lens must be replaced with a cotton swab or lens paper every time it is wiped.

10. Do not cover or pile other items on the machine to avoid affecting the heat dissipation effect of the machine.

11. During the work of the machine, do not move the marking machine, so as not to damage the machine.
How to Use a Fiber Laser Engraver?

Check the waterway and circuit before turning on the power. The boot sequence is:

1. Turn on the incoming power and turn on the key switch. At this time, the machine exhaust and the cooling system are energized, and the ammeter shows a value of about 7A.

2. Wait 5 to 10 seconds, press the trigger button on the external control panel, the ammeter shows the value is zero, after 3 to 5 seconds, the krypton lamp ignites, the ammeter shows the value 7A. (Refer to the operating instructions of the laser

power supply).

3. Power on the galvanometer.

4. Turn on the computer and call up the required marking file.

5. Adjust the laser power to the working current (10 ~ 18A), you can start marking. After marking, turn off the power of each component in reverse according to the above sequence:

1. Adjust the working current of the laser power supply to the minimum (about 7A).

2. Shut down the computer.

3. Turn off the power of the galvanometer.

4. Press the stop button.

5. Turn off the key switch.

7. Disconnect incoming power.
How Much Does a Fiber Laser Marking Machine Cost?

If you want to buy a fiber laser marking machine, you may wonder how much does a fiber laser marking machine cost? how to get a final price? According to different machine configurations, you will get the fiber laser marker cost from $2000 to $28,500.00. If you have an idea to buy a fiber laser marking system overseas, the fee of customs clearance, tax, and shipping costs should be included in the final price.
How Does a Fiber Laser Engraver Work?

The effect of fiber laser engraving is to reveal the deep material through the evaporation of the material's surface, or to mark traces through the physical change of material's 2D/3D surface caused by laser energy, or to burn out some substances by optical energy, then display all kinds of graphics, such as etched letters, patterns, numbers, characters, signs, barcodes and so on. Fiber laser marking system adopts the most advanced fiber laser and ultra high speed scanning system in the world. Optical fiber laser marking machine has high electro-optical conversion efficiency, air cooling, small overall volume, good output beam quality, high reliability, long service life and no maintenance. It can meet the requirements of higher depth, smoothness and fineness of the marker.

CONTACT

PRODUCTS

PAGE LINKS